Pemsa has launched this new wire mesh tray that increases the connection and installation options.
A new specific Fixing Kit has also been developed, Part Clamp 60×60-2, which further improves the features of this wire mesh tray.
This new product has the following advantages and features:
- Rejiband 60×60-2 is available with two rods on the base. This feature increases the connection options and makes installation easier for both supporting to a Surface or an Omega SPLUS bracket. It is also especially suited for fixing to Channel.
- Wide range of finishes: Electrogalvanised EG , Bichromate BYCRO , Hot Dip Galvanised HDG, BLACK C8 and Stainless Steels 304 and 316L
Increase in the load values of the wire mesh tray.
- The screw of the Part Clamp 60×60-2 is separate to the plate allowing direct manipulation with a tool and easy installation.
- The shape of the plate fits precisely on the double rod at the base of the tray. Maximum resistance.
- Easy connection to 41x21mm and 41x41mm channel by using an additional M6 channel nut.
- Conforms to IEC 61537 and CE Conformity to Directive 2014/35/EU.
You can check the information of these products in the Online Catalogue 4.0 from the following links: Rejiband 60×60-2, Fixing Kit 60×60-2
The new Rejiband 60×60 double base rod maintains all of the characteristics and properties of the range:
- Connection with Reinforced joints clamps and Click connectors…
- Rounded safety edge.
- Compatibility with all accessories in the range suitable for 60 depth.
If you have any questions please email marketing@pemsa-rejiband.com or for the UK sales@pemsa.co.uk Further information about our products can be found in the new Online Catalogue 4.0