Nemaband Crossover

´ Data sheet
Nemaband Crossover
  • ó
    GC
  • °
    Class 8
  • h
    100, 150
  • g
    150, 300, 450, 600, 750, 900
  • s
    1
  • n
    Steel with surface coating
  • 20 J
  • ł
    -50 / 150 ºC
  • Ł
    A1 No combustible
  • ETIM
Metal accessory for creating a crossover between two lines of Nemaband® ladder. Allows you to change a single cable route into three separate routes.

Reinforced profiles in C and Z formats that stiffen the construction of the cable ladder, to meet the demand in most markets.

Divides the electrical installation from one to three different lines.

Cable tray connection using M8 screws or Nemaband® M8 joint kit

CE certified in compliance with the low voltage directive 2014/35 / EU

GC Protection System. Hot dip Galvanised with 85 microns of thickness. Class 8 according to IEC 61537.

Suitable for creating crossovers with Nemaband® ladder for routing, protecting and distributing cables in electrical installations in industrial applications and large spans in: Oil & Gas and Petrochemical Industry, Power Plants, Electric Power Plants, etc. Water Treatment, Mining and Cement Offshore Platforms, Ports, Maritime Applications. Industrial projects in aggressive environments.
h g ¢ p
100 150 300 82002869 9.850
100 300 300 82002870 11.200
100 450 300 82002871 15.400
100 600 300 82002872 17.200
100 750 300 82002873 19.800
100 900 300 82002874 21.700
150 150 300 82002875 12.500
150 300 300 82002876 13.800
150 450 300 82002877 18.000
150 600 300 82002878 19.800
150 750 300 82002879 22.400
150 900 300 82002880 24.300
100 150 600 82002881 14.600
100 300 600 82002882 16.000
100 450 600 82002883 22.000
100 600 600 82002884 23.700
100 750 600 82002885 26.300
100 900 600 82002886 28.700
150 150 600 82002887 18.300
150 300 600 82002888 19.700
150 450 600 82002889 25.600
150 600 600 82002890 27.400
150 750 600 82002891 30.000
150 900 600 82002892 32.400