Home // Catalog // Cable Tray Systems, Supports and Accessories // Pemsaband. Cable Tray // Pemsaband One. Perforated Click System Cable Tray
é

Pemsaband One. Perforated Click System Cable tray

( Ref. 75831300 )

75831300
Perforated and embossed sheet steel tray of 35, 60 and 100 mm height, in GC, PG, AZ+, INOX 304 and 316L Protection System with a safety edge. Of 35 mm height, Width 300 mm, With GC protection system. The Pemsaband® One Perforated tray is suitable for supporting and routing electrical cables of medium and light loads. Ease of assembly thanks to its Click system of fast coupling between lengths, saving on material and labour. There are a wide variety of sizes to choose from according to the needs of each installation.

Wide variety of sizes, protection systems and accessories to adapt to the requirements of each electrical installation.

Profiled safety edge for cable protection. It also prevents possible cuts when handled by the installer.

Click system for the easy assembly and joining of straight lengths without the need for any other accessories.

The perforated and embossed base increases the transverse and longitudinal strength thus increasing the load capacity. It prevents fluid retention and achieves a lower unit weight.

UL Certified by the requirements of NFPA 70 and NEMA VE 1-2009. N Mark of Aenor according to IEC 61537 and CE Conformity to Directive 2014/35 /EU.

Support, management and distribution of cables in Electrical and/or telecommunications installations in: Civil Works, Tunnels, Car Parks, Public Buildings, Shopping Centres, Data Processing Centres, Infrastructures, Airports, Underground and Railway. Tertiary sector and industrial applications: Naval, Petrochemical, Textile, Chemical and Food. Indoor applications in the dry or in exterior atmospheres with wet environments according to the various protection systems.

  • &

    RENEWABLE ENERGIES

  • ?

    SERVICE AND RETAIL

  • Œ

    FIRE RESISTANCE SOLUTION

ETIM 10 EC000047
Huella de CO2. GWP A1-A3 (kg CO2 eq.) 4,872
Protection System GC
Finish HDG, Hot Dip Galvanised
Resistance Class Class 5
Flange (mm) 35
Width (mm) 300
Length (m) 3
kg/u 1,881
u 12
Material Steel with surface coating
Impact Strength (J) 20 J
Section (mm2) 9922
IP IP23
Working temperature range (°C) -50 / 150 ºC
Fire resistance E90 (90 min. 1000°C)