Pemsaband RX. Reinforced Cable tray

( Ref. 76134200 )

´ Data sheet
Perforated and reinforced sheet steel tray of 60 and 100 mm height, in GC or PG Protection System with a safety edge. Of 100 mm height, Width 200 mm, With 1.5 mm thickness. The Pemsaband® RX tray, with a gauge of 1.5 mm, is suitable for supporting and routing electrical cables of high loads. There are a wide variety of sizes to choose from according to the needs of each installation.

Wide variety of sizes, protection systems and accessories to adapt to the requirements of each electrical installation.

Profiled safety edge for cable protection. It also prevents possible cuts when handled by the installer.

Conforms to IEC 61537 and CE Conformity to Directive 2014/35/EU.

Sheet thickness of 1.5 mm gives greater strength and load capacity.

E90 fire resistance (90 minutes, 1000°C) according to DIN 4102-12.

Support, management and distribution of cables in Electrical and/or telecommunications installations in: Civil Works, Tunnels, Car Parks, Public Buildings, Shopping Centres, Data Processing Centres, Infrastructures, Airports, Underground and Railway. Tertiary sector and industrial applications: Naval, Petrochemical, Textile, Chemical and Food. Indoor applications in the dry or in exterior atmospheres with wet environments according to the various finishes.
  • $

    INDUSTRIA PETROQUÍMICA

  • @

    TUNELES. INFRAESTRUCTURAS

  • Œ

    RESISTENCIA AL FUEGO

ETIM EC000047
Protection System GC
Finish HDG, Hot Dip Galvanised
Resistance Class Class 8
Flange (mm) 100
Width (mm) 200
Length (m) 3
kg/u 4.800
u 3
Material Steel with surface coating
Impact Strength (J) 20 J
Thickness (mm) 1.5
Section (mm2) 18998
IP IP23
Working temperature range (°C) -50 / 150 ºC
Fire resistance E90 (90 min. 1000°C)